EC7000 Protection for elderly people and lone workers.

• Big keypad buttons, Big letter size
• Bluetooth carkit ready
  
• Crystal clear enhance sound both in earpiece and speaker phone
• Hearing Aid compatibility Compatible with HAC M3/T3
• One press emergency button to activate distress call and message
• SIRF III GPS
• Man Down / Loss of verticality
• Up to 5 waterproof remote panic buttons (Range 75m)
• RevGeoGate Verified.
• Faster localisation with RevGeoGate Cell Id feature.
• Works with RevGeoGate Alerts! Digital Frame
• 3 direct dialing keys (M1/M2/M3)
• One touch torch function
• Alarms over SMS
  
• Alarms over GPRS
  

• FM Radio with headset

In the case of an emergency, the RevGeoGate service resolves the GPS coordinates of the EC7000 into actual street names and thereby sends the position of the phone to  the three set emergency text message numbers by text message. 

With RevGeoGate Cell ID feature a rough location will be returned in a matter of seconds, until the GPS is ready to provide the accurate position.

 Example:

Alert from [Phone Number] at 3 m : Valkenputstraat 87 and 32 m: Dianalaan 150,2600,Belgium, GPS time 11/11/10 15:09:17

4.4.3. EC 7000 Configuration wizard.

4.4.3.1. Add the device using the configuration wizard.

Please note:

A service fee applies for adding the device over GPRS connections. More information about the service fee can be found here.

A one week trial account is available free of charge.

You can exit the wizard after step 4 If you use RevGeoGate only.

Gather the following information :

• IMEI Number can be located on the packaging box or behind the battery of the phone.
• Serial Number can be located on the packaging box or behind the battery of the phone.
• Mobile Phone Number

4.4.3.2. Access the control panel.

4.4.3.3. Add/edit assets: EC 7000.

4.4.3.4. Step 1: Add/edit assets.

4.4.3.5. Step 2: Device and company identity.

Choose an appropriate name for your device

Enter the IMEI number of the device

Enter the serial number of the device

When finished click next step to proceed to the next screen.

4.4.3.6. Step 3: RevGeoGate and telephone settings.

These settings will be retrieved automaticly after you have activated the RevGeoGate service. This is an overview of your RevGeoGate account.
The language dropdown will change the language of the text SMS send to the SOS SMS numbers configured in your mobile.

If you don’t want to automatically renew your subscription then you can turn the “automatic renewal” radio button off. RevGeoGate will parse your requests untill the “subscription stop” date is reached.
 

Some functions and configuration settings of the EC 7000 require text SMS to be send to the device. You can purchase additional SMS credits if you click the “Buy SMS Credits”. Copy your IMEI number in the remarks field of the purchase order.
 

RevGeoGate Worldwide users can check their remaining SMS credits here RevGeoGate users can use this link to retrieve the position of your device on a Graphical phone, an Internet connection is required to use this functionality.

4.4.3.7. Step 4: Sim card details.

These settings will be retrieved automatically after you have activated the RevGeoGate service.
Otherwise enter the mobile number of the EC 7000 here.

Select your network operator to setup the SMS connection correctly.
The APN settings are informational and will only be send to the device if you give your approval to send messages to your device by SMS.

See Your SMS approval is required to communicate with your device by SMS. You can buy additional credits if you click the “Buy SMS Credits” link. This is not necessary If you only want to use RevGeoGate text SMS only. You can exit the configuration wizard here.

You have to approve that you want to connect your device over GPRS. A temporary license of one week will be granted to try out this functionality. To extend your license contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
In the next steps the EC 7000 will be automatically configured and connected against our tracking platform
Please check the following

• That the selected mobile operator is correct
• that your mobile phone number is correct.
• You have sufficient SMS credits
• The EC 7000 is turned ON
   
You can find the status of your subscription here at all times.

After your confirmation the screen should look like this

 4.4.3.8. Step 5: Setup remote control number.

4.4.3.9. Step 6: Configuration by SMS.

Configuration SMS will be send your device.

This step can take several minutes, depending on the speed of the mobile operator. The configuration will only be successful if all 4 items are “configured”. You don’t have to do anything except to wait until the device is connected.

If this step fails then contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it for assistance.

4.4.3.10. Step 7 : Configuration with wireless connection.

You can enable/disable man down remotely. the filtering delay is the time that the event should be activated before launching an event.

The time that the pre-alarm sounds before the actual alarm starts.

Track and trace mode for location updates min value is 2 minutes.

Interval in hours before the device sends a diagnostic self test

Parameter to synchronize the time with the server.

4.4.3.11. Step 8 : Emergency Call handling.

NOTE: Preferably setup numbers in International format. +32.........

Define on how the emergency call should be handled. (See chapter 4.4.4)

Enter up to three numbers to call in case of an emergency.

Automatic call answering with hands free activated.

Enter up to three mobile numbers that will receive the location SMS.

Enter the telephone numbers that should be on speed dial (M1/M2/M3)

4.4.3.12. Step 9 : Setting up a geo fence.

The center of the map will be the center of your geo fence. You can drag the map until it is positioned correctly. The minimum radius is 200 m.

Press Set to see the actual geo fence on the map. When finished press save to save the geo fence.

4.4.3.13. Step 10 : Finished.

4.4.4. Emergency Call Handling

4.4.4.1 Only one emergency number must be reached

4.4.4.2 All emergency numbers must be reached

4.4.4.3 Confirmation by digital command

Click on the green globe to see the current location of your devices.

Select your device by clicking on the icon in the menu bar, map or list.

Click on the SOS acknowledge button to acknowledge the alarm digitally.